Intelligent Medium Power Bar (Bus bar system)

E+I Engineering’s Intelligent Medium Powerbar (iMPB) is a 600 Volt encased track busduct.

iMPB is constructed from high density 99.99% conductivity copper. The conductors are insulated with a custom IEC certified thermoplastic material with outstanding heat characteristics. The insulation has excellent dielectric strength and is impact resistant.
iMPB is constructed with an aluminium housing providing a durable structure which also acts as a ground path.
The iMPB range can be engineered with an over-rated neutral option for busbar systems with non-linear loads. The additional neutral capacity prevents overloading caused by zero sequence harmonic currents.
E+I Engineering offer a 100% fully isolated ground for systems where earth isolation is required e.g. systems with heavy microprocessors, based loads or large computer based installations.

iMPB joint pack securely locks two feeder lengths together with a traditional busbar bolted joint

* No special tooling is required and joints can be disassembled and reassembled easily

* 100% fully isolated ground maintained

* Strong and thermally secured joint

* Standard cable end boxes with options for cable entry from various points

* Centre feeds and load bank feeds can also be supplied to meet specific project requirements

Modular design of iMPB allows it to be easily installed either horizontally or vertically depending on specific project requirements.